When someone notices uneven hips or a higher shoulder, the first guess is often a curved spine. Sometimes that guess is right. Other times the pelvis is the main reason the body looks tilted, and the spine bends to keep the head level over the feet. Part of a good spine visit is working out which one is driving what you see. A few plain checks can make that conversation far more useful.
Two possible sources of tilt
A curved spine is one thing. A pelvis that sits lower on one side is another. The pelvis can tilt because one leg is measurably shorter, because the muscles around one hip are tighter, or because a person habitually stands with more weight on one foot. When that happens, the spine may bend in response. Examiners try to separate these possibilities because the answer changes what gets measured next and how the findings are explained to you.
Ask whether the examiner checked for a leg length difference and how it was checked. A reasonable exam may compare the heights of the knees and ankles while you lie down, or look at the position of the pelvis while you sit. Write down whether the difference was described as measured or estimated. Those two words carry very different weight in a record you may need to compare later.
What to observe before the visit
Before your appointment, stand barefoot against a plain wall in your usual posture. Hold still for a few seconds and notice where your shoulders, hip crests, and knees sit relative to the wall. Then stand again with your weight split evenly between both feet, and note whether the tilt changes. Pay attention to whether you favor one foot during long standing, whether one shoe wears down faster on the inside or outside edge, and whether one hip feels stiff after sitting for a long stretch.
These are observations, not a test, and they will not settle anything on their own. Their purpose is to give the examiner something to compare against what the exam room shows. Bring the notes on paper so you can read them aloud or hand them over without relying on memory.
Questions to ask in the room
Several questions can clarify the picture. Ask whether the pelvis level changed when you stood with equal weight, and whether that change was checked during the exam. Ask whether the spine was assessed with the hips level, since a tilted pelvis can alter how a bend appears. Ask whether the examiner expects any part of the tilt to come from the legs or hips, and what that would mean for the next step. If a lift, block, or shoe change is suggested, ask whether it is meant for a short trial, a longer period, or the rest of your life, and who will check whether it is helping.
Also ask what the examiner would expect to see if the tilt came from the hips rather than the spine. You are not looking for a single answer on the first visit. You are looking for a clear explanation of what was checked, what was not, and why.
What to compare on the next visit
Keep a short note after each appointment. Record the date, what was measured, whether any leg or pelvic check was done, and whether the examiner described the tilt as coming from the hips, the spine, or both. If you return later, bring that note with you. Then compare what you hear. If the explanation shifts between visits, ask what changed in the exam or the measurements to cause the shift.
Do not adjust your own shoes, add lifts, or change how you stand based only on home observations. Those decisions belong with the examiner, who can see the full picture. The goal of your home checks is simply to make your questions sharper and your visit more productive.
Nothing in this article can tell you whether your hips, legs, or spine are the cause of what you have noticed. That answer comes from an examination in person. What this approach gives you is a clearer way to ask whether the tilt starts below the spine, above it, or in both places, and a written record that makes the answer easier to check over time.